5 Top Reasons That Delay Balustrade Installation

Are you taking more time for installing a balustrade system as a handyman or contractor than you’d like actually?

Are you finding your clients getting a bit annoyed as they ask you – when the job will get completed?

If your answer is yes; don’t worry, we have compiled a list of five top probable delays that could be damaging your means of income.

Balustrade Fencing

Likely Delays:

  1. Large gaps between pillars

If the gaps between pillars are too large, there could be a delay in installing a balustrade system on a balcony. That means a small piece of balustrade needs to be fitted in between the pillars. When such type of a delay is caused, unnecessary money and time need to be spent on a site.

  1. Wrongly installed pipes/ cables

If cables or pipes are positioned too nearly to the floor or wall’s surface then it becomes an issue for installing a balustrade system. Pipes or cables should be positioned at least 200mm away from the surface so as to avert touching them when the holes are drilled.

  1. Uneven flooring:

This problem pertains to the tiles that are wrongly installed. It can perhaps crack the tiles if a balustrade system is installed on uneven tiles. That is the reason why tiles are required to be replaced before an appropriate balustrade system can be installed.

  1. Not enough support:

To install the balustrade system, it is really crucial to have sufficient support like delicate timber floors or walls. The structure needs to be made more protected first, which causes redundant time spent on the building site that means more expenditure.

  1. Unfinished building site:

All types of delays can be caused when installing a balustrade system in an unfinished building site. It can cause a lot of time delays and frustration when trying to compute the exact place for balustrade installation to working around the individuals where the system ought to be installed.

What makes JCV’s balustrades different?

balustrade Balustrade Fencing Sydney

  • Due to the large volume of production, our balustrades are more economical.
  • We’re accessible throughout and we just need a rough sketch to design your custom balustrade system.
  • For irregular floors, hard-to-reach corners or difficult staircases, we have practical solutions for all of them.
  • We’re accessible all through and can provide assistance when you require it.
Share on FacebookTweet about this on TwitterShare on LinkedInPin on PinterestShare on TumblrShare on RedditDigg thisBuffer this pageShare on StumbleUpon